PRODUCTS CENTER

Email : [email protected]

pfa unigasket ptfe hose

PureFlex | Ultra-Pure and Chemical Resistant Hoses and

PureFlex fittings and collars are manufactured specifically for FEP and plastic-lined hoses. Applying the highest quality standards, they are designed for compatibility with most manufacturers'' true-bore plastic hoses including smooth bore, convoluted, cuffed, and rubber covered plastic lined.

PTFE, FEP (Teflon®) Insulating hoses

PTFE/FEP (Teflon®) Insulating Hoses . Our PTFE/FEP products are produced to very high quality standards and are characterized by their extreme high-temperature resistance. GREMCO’s PTFE/FEP insulating hoses guarantee you high flexibility even with thin wall thicknesses and can also maintain very narrow tolerable wall thicknesses. Our protective hoses are very chemically resistant and have

CLW – Convoluted PTFE hoses and tubes - UniGasket Spain

Produced with PTFE resins characterized by low microporosity and high tensile strength, the PTFE convoluted tube and hoses of UNIGASKET are the right answer for the transport of gas, fluids and chemicals where the bending radius request a high flexibility together with a low permeability. The helicoidal profile has been studied to avoid blockages of the passing fluids and their consequent

Shantiflex

Produced with PTFE resins with high tensile strength and braided with S.S.AISI 304 the Unigasket''s PTFE hose are the right solution for the transport of steam, gas, fluids and chemical agents for high temperature and pressions. The wide range of temperatures reachable (from -70 ° C to +260 ° C) by our hoses allow them to be the right solution for many technical problem in any industrial

UNF Uniflow: smooth convoluted PTFE hose - UniGasket Spain

As SS braided hose, smooth PTFE inside, assely has a smooth finish, Silicone or EPDM external cover, vulcanized during the extrusion at temperature from 240 to 270 °C. TEMPERATURE. Temperature from -40°C to 200 °C for Silicone, from -40°C to 180 °C for EPDM. CONSTRUCTION. Smooth PTFE innercore bonded to Silicone or EPDM.

Understanding The Differences Between PFA And PTFE | Tef

30/5/2016· However, PFA has a shorter flex life than PTFE. PFA maintains a transparency under extreme temperatures of up to 500 degree Fahrenheit, while PTFE is milky white up to the same temperature and is also considered more resistant to heat. The clearly differentiating factors between both are PFA’s electrical properties. While PFA holds quite similar dissipation factor to PTFE, it has …

Tube, Hoses & Pipes : 3M Fluoropolymers

High pressure hydraulic hose solutions based on 3M™ Dyneon™ PTFE are used in material handling equipment and mechanical engineering systems where petroleum-, synthetic- or water-based hydraulic fluids are present. Our inner layer hose constructions are the answer when excellent temperature, chemical and permeation resistance at elevated pressure levels are required. And let''s not forget

UNIPHARMA PTFE hose smooth flexible - UniGasket Spain

RINFORSIL: braided silicone hose. ARMED SIL – Reinforced silicone hoses with ss wire spring. UNISIL: silicone tubing and extruded profiles. GSP: glass fibre sleeving and hose treated with silicon. Coversil Heat shrinkable silicone tube. Thermoplastic. Fluoropolymer. FEP …

High pressure hoses - Polyfluor

The hoses consist of an inner hose of PTFE, anti-static PTFE, PFA, or ETFE with a single Stainless Steel braid. More info. Type DB, Double Braid. The smooth high pressure hoses of type DB Heavy Duty are equal to the hoses in the SB Heavy Duty series, but are additionally equipped with a double Stainless Steel braid. More info. Type EBH. Type EBH is a thin wall, spiral/convoluted PTFE hose with

PTFE Convoluted Hose CLWB | Unigasket

Produced with PTFE resins characterized by low microporosity and high tensile strength, the PTFE convoluted tube and hoses of UNIGASKET are the right answer for the transport of gas, fluids and chemicals where the bending radius request a high flexibility together with a low permeability. The helicoidal profile has been studied to avoid blockages of the passing fluids and their consequent

Double Braided PTFE Hose: FHL - FHM - FHM DC | Unigasket

Produced with PTFE resins with high tensile strength and braided with S.S.AISI 304 the Unigasket’s PTFE hose are the right solution for the transport of steam, gas, fluids and chemical agents for high temperature and pressions.. The wide range of temperatures reachable (from -70°C to +260°C) by our hoses allow them to be the right solution for many technical problem in any industrial field.

High Pressure Hoses - Habia

The high pressure hoses have an inner core of PTFE, PFA or ETFE, that is covered with one or two layers of stainless steel wire and for some hoses a multi-braid of Kevlar® and stainless steel. Hoses with an inner tube of PTFE are also available as fully antistatic or with an antistatic inner layer. To ensure the highest possible quality of our hoses we produce both the inner tubing and the

SMOOTH BORE FEP/PFA/PTFE HOSE

FEP/PFA/PTFE HOSE Rubber Fab offers a full line of flexible smooth bore FEP, PFA and PTFE lined sanitary hoses for Pharmaceutical, Food and Beverage, and Industrial appliions. NEW FROM RUBBER FAB RF-RT Smooth Bore FEP Lined EPDM Covered Hose RF-RTP Smooth Bore Heavy Wall PTFE Lined EPDM Covered Hose RF-SF SUPREME-FLEX: Smooth Bore PTFE with Silicone Outer …

Fluoroplastic Tube: FEP - PFA - PVDF | Unigasket

FEP PFA and PVDF are melt processable fluoropolymer resins from which UNIGASKET extrudes fluoroplasting tubing in various sizes (see data sheet). The products made with these fluoropolymers resins meet a wide range end user requirements. They have high acknowledgment for their unique properties and versatility wich are helping to solve many industry’s materials problem in chemical …

PTFE Spiral Hose - Spiralsmooth | Unigasket

Spiralsmooth is the new PTFE AISI 304 braided tube smooth inside with stainless steel spiral which allows better flexibility.. PTFE hose with spiral is the perfect solution for appliion where maximum smoothness is required in order to avoid that residues remain in the lows of the convolutions in CLW and CLWB hoses. Itv is suitable in the food, biotechnology, pharmaceutical and cosmetic

UNIGASKET - Teflon Hose - PTFE HOSE WITH RUBBER COVER

15/1/2013· UNIGASKET - Teflon Hose - PTFE HOSE WITH RUBBER COVER - TEFLON - Flytech Engineering is providing solution in hoses and fittings. Besides, we are also supply hydraulic hoses, coupling, valves, tube, ducting hose and related accessories. Our objectives was to be market leader in hoses and fittings.

PTFE Chemical Hose | Unigasket

KEMI – Chemical PTFE hose. KEMIFLEX is an inner tube of helically convoluted P.T.F.E. with an outer cover of 304 stainless steel braid, giving good flexibility and kink resistance and is manufactured from top quality (Polytetraflu oroethylene) P.T.F.E. resin, giving a translucent appearance. KEMIFLEX can be fitted with crimped fittings for

PTFE Hose | Parker NA

Parker’s PTFE hose portfolio is wide-ranging and offers excellent chemical resistance for the majority of media types. These hoses have the capability to operate under both high and low temperatures and therefore handle extreme conditions very well. Each PTFE hose offers low friction, which minimises pressure drops and avoids the build-up of unwanted deposits.

Smoothbore Fluoropolymer Hoses - Sanitary Hoses - Rubber Fab

Smoothbore Fluoropolymer Hoses. Smoothbore Fluoropolymer hoses have a wide array of appliions due to the variety of liners available. Rubber Fab offers a full line of flexible smoothbore FEP, PFA, and PTFE lined sanitary hoses for Pharmaceutical, Food & Beverage and Industrial appliions.

Double braid PTFE hose: FHL – FHM – FHM DC - UniGasket Spain

Produced with PTFE resins with high tensile strength and braided with S.S.AISI 304 the Unigasket’s PTFE hose are the right solution for the transport of steam, gas, fluids and chemical agents for high temperature and pressions. The wide range of temperatures reachable (from -70°C to +260°C) by our hoses allow them to be the right solution for many technical problem in any industrial field

PFA Core Hose Smooth Bore | PTFE and PFA Core Hose | Hoses

PFA hose is highly flexible, with a smooth-bore PFA core that complies with FDA regulation 21CFR Part 177.1550, USP 87, 88 Class VI, and 3-A. An optional carbon black-filled PFA core is available for appliions that require static dissipation. A smooth inner wall provides flow control and enhanced drainability for precision and cleanliness. The silicone cover washes down easily to prevent

FEP Tubing and FEP Teflon ® hose | Holscot Europe

FEP tubing and FEP extruded hoses are used in many appliions due to its unique features: Chemically resistant. Flexible. Transparent. Resistant to UV. Usable at temperatures between - 190 ° C to + 204 ° C. Holscot can supply FEP tubing between Ø 1 mm and Ø 400 mm with a wall thickness between 0.1 mm and 3 mm.

Spiral PTFE hose - UniGasket Spain

Spiral PTFE hose. Spiralsmooth is the new PTFE AISI 304 braided tube smooth inside with stainless steel spiral which allows better flexibility. PTFE hose with spiral is the perfect solution for appliion where maximum smoothness is required in order to avoid that residues remain in the lows of the convolutions in CLW and CLWB hoses.

PTFE Tubing | FEP Tubing | PFA Tubing | UK | Polyflon

PTFE PTFE Tape FILMS, SHEETS, TAPES Fluoropolymer Solutions High performance fluid handling products in a broad portfolio of inert materials. Explore product range PTFE • FEP • PFA • PVDF & more . UK fluoropolymer experts. UK Specialists in high quality Fluoropolymer products and manufacturers of thermoformed tubing and connector asselies. 30+ years’ experience in Fluoropolymers and

Shantiflex

FEP PFA and PVDF are melt processable fluoropolymer resins from wich UNIGASKET extrudes fluoroplasting tubing in various sizes (see data sheet). The products made with these fluoropolymers resins meet a wide range end user requirements. They have high acknowledgment for their unique properties and versatility wich are helping to solve many industry''s materials problem.

PTFE Convoluted Hose CLWB | Unigasket

This PTFE convoluted hose are also designed to be used with a range of hydraulics fittings. Ferrules are available according to the crimping table. CONSTRUCTIONS. Produced with PTFE resins and braided in AISI 304. This kind of resins are approved by FDA, DVGW and BFR and allow to our hoses to be used with foods and drinks.

PFA Corrugated Tubing, Convoluted PTFE Hose | BUENO Technology

28*32. flexible to highly flexible. tight bending radius only causes little cross-section reduction. non-porous. translucent. resistant to irradiation and weather. almost universal chemical resistance. PFA Corrugated Tubing, PFA Convoluted Tubing and PFA Coiled Tubing, these products are suitable for use in. Food and beverage industry.

Fluoropolymer Hose & Fittings Products

PARKER/PAGE PTFE Hose product materials are compliant with the following requirements: FDA 21 CFR 177.1550, 177.2600 UPS XXIII Class VI Requirements European Pharmacopoeia 3.1.9 ISO 10993 Sections 5, 6 10, 11 USDA Standards 3A Standards WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR …

Fluoroplastic tubing - Habia

The material coines many of the properties of PTFE and FEP. PFA tubing has a maximum service temperature of 260°C. Fluoroplastic tubing FEP. We manufacture tubing in FEP. FEP is transparent and can be welded as well as sealed by melting. The material is transparent to UV- and visible light. FEP is very easy to clean, has a low absorption coefficient and requires no lubriion. FEP tubing

PTFE Core Hose Smooth Bore | PTFE and PFA Core Hose

3/8 in. (7) 1/2 in. (10) 3/4 in. (3) Safe Product Selection. The complete alog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance.