PRODUCTS CENTER

Email : [email protected]

sae 100r2at hydraulic hose pressure specs

SAE Hydraulic Hose – Ideal for Low, Medium and High

SAE 100R3 double fiber braid hydraulic rubber hose is ideal for medium pressure fuel and oil lines as well as return and suction hoses of hydraulic systems. It is constructed with an inner tube of oil-resistant synthetic rubber, a reinforcement consisting of a ply, or plies, of woven or braided textile fibers with a suitable spiral of body wire, and an oil and weather resistant synthetic

TWO WIRE BRAID - Home - PIRTEK AUSTRALIA

Medium to high pressure hose for hydraulic fluids such as mineral oils/aqueous emulsions/water/air and inert gases. Outer cover must be pin-pricked if hose is to be used to convey air or gas above 17 bar.

SAE 100R1AT Specs | Hose and Fittings Source

According to: ISO 1436 / DIN EN 853 type 1SN / SAE J517 type SAE 100R1 AT. High Pressure, Single Steel Braid Reinforced Hydraulic Hose. Black, Oil, Weather and Abrasion Resistant Synthetic Rubber. Maximum Temperature Recommended for Water Base Hydraulic Fluid 158°F (70°C) Maximum Temperature Recommended for Air 140°F (60°C)

SAE 100R2 - Hydraulic Hose & Fittings - JGB Featured Markets

J-FLEX® 2M 2SN/SAE 100R2AT Hydraulic Hose. For medium to high pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose. 1/4" to 1" ID.

SAE 100 R2 A Hydraulic Hose for Harsh Working Condition

SAE 100 R2 A hydraulic hose, also called DIN EN 853 2ST hydraulic hose, is similar to SAE 100 R2 AT hydraulic hose in structure. It is composed of three parts: tube, reinforcement and cover. Tube is made from black oil resistant synthetic rubber, making hose work well in delivering various oils. Reinforcement is made from two layers of high tensile steel wire braid, making hose resistant to

Hydraulics alog 2015 Hydraulic Hose, Fittings & Equipment

Hydraulic Hose Line N-Q Hydraulic Fittings, Adapters, Standards & Specs R-S Hydraulic Equipment & Accessories T Notes U Hoses Hydraulic Hose & Fitting Products 1 Hydraulic Hose Nomenclature 3 Low Pressure SR6 - SAE 100R6/EN 854 R6 5 HR6 - Desert ®SAE 100R6/EN 854 R6 5 HR4 - Desert® SAE 100R4 6 SR3 - SAE 100R3/EN 854 R3 6 IG - Insta-Grip™ 300 7 IGHT - Insta-Grip™ HT 300 7 …

GH781-8 | Danfoss PowerSource

GH781 is a two-wire braided hydraulic hose with an extremely diverse range of uses in the hydraulics market. Features. Meets or exceeds hose specifiions and agency ratings; SAE 100R16 Type S, EN853 2SC, ISO 11237-1 Type 2SC, DNV, ABS, USCG, MSHA. DURA-TUFF™ cover provides much higher abrasion resistance leading to longer hose life.

Hydraulic hose specifiion SAE 100R6. Series

SAE100R6PM hose is made as per the specifiion SAE type 100 R6. The industry standard hose manufactured to strict international quality specifiions in order to provide consistency of performance. Designed with one-textile braid construction & meets global industry standards. It offers a long service life and a wide range of fluid

Store | Mobile Hose Fixers

This hose is a quality product, It suits either crimped ends, or our D.I.Y field fit reusables also available from this web store. Model: 100R2AT-08. This is a good quality hose made in Europe to SAE (Society Automotive Engineers) SAE 100R2 – 08 NON SKIVE HOSE (Two Braided Wire) Picture is off actual hose . Construction

SAE 100R2AT 2-wire braid high pressure hose - Hydraulic Hose

14 rows· SAE 100R2AT 2-wire braid high pressure hose 2-wire braid high pressure hydraulic hose …

Hydraulic Hose Selection Guide

Recommended for: Medium pressure hydraulic appliions. Meets or exceeds SAE 100R16 performance specifiions. Tube: Black, oil resistant, Nitrile (NBR). Reinforcement: Two wire braid of high tensile steel. Cover: Black, oil and abrasion resistant Neoprene (CR). MSHA approved. Temperature range:-40°F to 250°F. Min. Wt. Hose Hose Rated Min

Store | Mobile Hose Fixers

PIRTEK SAE 100R2AT, SIZES R2AT-06. TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-06-SF-S.ENGMATTEC 100R2AT 3/8" DN10 Hose can also be used with the following hose fittings; RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails; EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.

J517A: Hydraulic Hose - SAE International

15/12/2016· The SAE J517 100R1A, 100R2A, 100R2B and 100R 2BT are discontinued due to lack of demand. For DOD orders replace 100R1A with 100R1AT, replace 100R2A, 100R2B and 100R2BT with 100R2AT. The SAE J517 100R1AT maximum working pressures were replaced by the type S maximum working pressures beginning with the year 2009, eliminating the need to label

Hydraulic Online - Shop Online | hydraulic fittings Gold Coast

ENGMATTEC''S FOUR MOST COMMON HYDRAULIC HOSE BORE SIZES ARE AS FOLLOWS., 100R2AT 1/4" DN6, 100R2AT 3/8" DN10, 100R2AT 1/2" DN12, 100R2AT 3/4" DN19. ALL THE Hoses listed above can also be used with the following POPULAR BrandS of …

Pacific Hoseflex Hydraulic Rubber Hose - SAE 100 R2AT

29/6/2015· SAE 100 R2AT. Part No.: IH-R2AT Colour: Black Tube: Synthetic oil resistant rubber. Cover: Synthetic rubber – abrasion, ozone and weather resistant. Reinforcement: 2 high-tensile steel wire braids. Size Available: 1/4’’ – 4’’ Temperature:-40°C +120°C SAE 100 R2AT Use: High pressure hydraulic oils, air and water. Standards:

Allied Hose & Fittings - Hydraulic Hose

122 Double Wire Braid - SAE 100R2AT - MSHA Cover. 111 is a medium pressure, single wire hose which meets the requirements of SAE 100R1AT and EN 853-1SN. The hose is ideally suited for medium pressure hydraulic oil lines, return lines, grease lines, water lines and power steering hoses. This hose has an MSHA approved cover for flame retardance

Technical TECHNICAL

** Maximum service pressure for lube oil and fuel systems appliions (Code F) may be less than maximum service pressure for other systems appliions, e.g., Code H. Refer to individual hose listings in Section A and Hose Asselies List, SAE J1942-1 or HPD Approval Bulletin #APR-004. T emperature Hose Petroleum base hydraulic fluids and

SAE MOBILUS

17/7/2020· The maximum working pressure of a hose assely comprising SAE J517 hose and hose connectors per SAE J516, SAE J518, SAE J1453, etc., shall not exceed the lower of the respective SAE maximum working pressure values. When using SAE J517 hose for marine appliions, refer to SAE J1475, SAE J1942, and SAE J1942-1. The SAE J517 100R9, 100R10, and 100R11 hoses were …

SAE 100 R2 AT Hydraulic Hose for Oils Delivery

SAE 100 R2 AT hydraulic hose, also called DIN EN 853 2SN hydraulic hose, is suitable for engineering machinery and continuous working hydraulic equipment. And it has excellent hot oil and impulse resistance. There is no need to strip the outer rubber layer during withholding joints for this kind of hydraulic hose. It is composed of three parts: tube, reinforcement and cover. Tube is made from

Hydraulics alog Hydraulic Hose, Fittings & Equipment

Hydraulic Hose Line Varied pressures, abrasion levels and temperatures are no match for ContiTech Hydraulic Hose. HOSE XR16SC SAE 100R16 EN 857 2SC › High-pressure appliions with tight bends ID 1/4" - 2" 1/2 SCP3 SAE 100R17 › 1- or 2-braid hose › High-pressure appliions with tight bends ID 1/4" - 1" XCP3 SAE 100R17 › 1- or 2-braid

J-FLEX® Hydraulic Hose - Hydraulic Hose - SAE Standards

JGB presents the J-FLEX SAE Hydraulic Hoses. MSHA approved. Blue cover available. J-FLEX 1 1SN/SAE 100R1AT, J-FLEX 2M 2SN/SAE 100R2AT, J-FLEX 12M SAE 100R12, J-FLEX 13M SAE 100R13, J-FLEX 15M SAE 100R15. Request a quote. Hose ID, Working PSI, Burst PSI, Hose OD, Bend Radius. Please feel free to contact us for more information.

High Pressure Hydraulic Hose, 1SN, 2SN, 4SP, 4SH, R13 and R15

Different types standard high pressure hydraulic hose with special specifiions. We can supply standard high pressure hydraulic hose including high-pressure hose EN 853 1SN, 2SN, 4SP, 4SH, SAE 100R13 and R15. They are used as flexible hoses in the hydraulic systems of machines and mechanisms for the transportation of mineral and hydraulic oil, fuel oil and water-oil emulsions. High …

100R2-AT Specs | Hose and Fittings Source

SAE 100R2AT DIN EN 853 2SN According to: ISO 1436 / DIN EN 853 type 2SN / SAE J517 type SAE 100R2 AT High Pressure, Double Steel Braid Reinforced Hydraulic Hose. Our SAE 100R2AT / DIN EN 853 2SN Hydraulic Hose has a greater working …

100R2AT Hydraulic Hose - Hose in a Hurry

SAE 100R2AT Hose Specifiions Weatherhead H425, Hydraulax R2, Parker 301, Aeroquip FC212, Gates G2, and any brand SAE 100R2AT hose. Fits in appliions where these hoses have been used

SAE 100R16 High Pressure Compact Hose - Hydraulic Hose

Hydraulic equipment often needs slim hose for tight routine and SAE 100R16 compact hose is the answer. Reinforced by two braids of high-tensile steel wire, it shares similar specifiions of SAE 100R2 except tighter bending radius. Black nitrile tube will not react with water- or petroleum-based hydraulic fluid. Neoprene cover is resistant to abrasion, weather degradation and chemicals

Hydraulics Brochure Hydraulic Hose, Fittings & Equipment

High-pressure hydraulic hose used in construction, forestry, surface mining, oil and gas, waste handling, utilities and other appliions where lower temperature can impact performance. B2 – Bite-to-Wire fittings across the entire line (1/4" to 2") KEY FEATURES Handles low temperature-70° 6. The PC440i Production Crimper Controller can store up to 50 dies and 150 crimp settings, and its

J517: Hydraulic Hose - SAE International

17/5/2010· The general specifiions contained in Sections 1 through 12 are applicable to all hydraulic hoses and supplement the detailed specifiions for the 100R-series hoses contained in the later sections of this document. (See Tables 1A and 1B). This document shall be utilized as a procurement document only to the extent as agreed upon by the manufacturer and user. The …

Balflex® FORZA DUE | SAE 100R2AT - DIN EN 853 2SN

All Balflex® hydraulic hoses are produced to Balflex® specifiions and according to ISO 1436, SAE J517 and EN 853 to EN 857 standards. They cover a wide variety of low to very high pressure appliions, in rubber, thermoplastic or P.T.F.E, with textile and steel reinforcement, for petroleum and water base hydraulic fluids. Balflex® industrial hoses are produced to Balflex

Hydraulic Online - Shop Online | hydraulic fittings Gold Coast

PIRTEK SAE 100R2AT, SIZES R2AT-08. TOTAL RUBBER SUNFLEX SAE 100 R2AT EN 853 2SN, SIZE HYD-R2T-08-SF-S.ENGMATTEC 100R2AT 1/2" DN12 Hose can also be used with the following hose fittings; RYCO BITELOK ONE-PIECE CRIMP NON SKIVE T200 AND T700 hose tails; EATON TTC / Z Series braided hose one-piece bite the wire style hose fittings.

SAE 100R9 - High pressure hose,Hydraulic hose

DIN Hydraulic Hose Series. DIN EN853-1SN; DIN EN853-2SN; DIN EN856-4SH; DIN EN856-4SP; More Hose Fittings. Hydraulic Adapters and Fittings; Camlock Coupling; Air Hose Coupling; More PRODUCT DETAIL. SAE 100R9. Type A - Thick cover (skive type) Type AT - Thin cover (no-skive type) Construction: This hose consists of an inner tube of oil synthetic rubber, four wire braids …